 |
Ipricot S1010FR Frame Relay Satellite IP Router/Receiver |
 |
 |
|
 |
|
 |
| Ipricot is launching the IPR-S1010 FR, its brand new Frame Relay integrated satellite router receiver designed to receive the outbound carrier at the distant site at a very competitive price. |
 |
| Price: $3,420.00 |
|
|
| |
|
|
|
 |
|
|
IPricot is launching the IPR-S1010 FR, its brand new Frame Relay integrated satellite router receiver designed to receive the outbound carrier at the distant site at a very competitive price. The IPR-S1010FR main functions are:
- Receiving any QPSK, 2-45Msymb/s carrier
- De-encapsulating the Frame-Relay data based on the customer DLCI channel allocation
- Forwarding the extracted data directly on the customer LAN through its 10/100BaseT Ethernet/Fast Ethernet port
Key Advantages
This new Frame Relay solution is offering a number of key advantages to the Operator and its customers:
- It takes the best of the 2-Way DVB platforms for Point to Multi-point platform enabling Assymetric IP services tailored to customer need
- The operator does not have to invest in an expensive redundant IP/DVB Gateway to offer carrier class IP backbone services (potentially the operator only needs to add some new interfaces to its existing teleport router infrastructure)
- It minimizes protocol overhead, increasing the bandwidth efficiency and therefore reducing the overall satellite cost (especially for small VOIP packects).
Finally The IPR-S1010 FR is offering an all in one solution for the reception and data forwarding of the outbound channel at a very cost effective price. It has been tested and validated with a satellite operator platform. 
| General Features |
19" Rackmount
DVB Compliant
Universal LNB Compatible / US / Asia LNB
C-Band / Ku-Band / L-Band
Replaceable Flash Memory Containing Embedded Software & OS
Easy OS Update in Flash Memory
High Reliability via Watchdog Control
Ability to Embed Private Applications |
|
| Tuner |
| Input Frequency |
950 - 2150 MHz (L-Band) |
| Input Impedance |
75 Ohms |
| Connector |
F-Type |
| LNB Power Supply |
14/18V/OFF, Max 350 mA |
Over Current & Short Circuit Protection
Band Switch Control using 22 KHz Signal |
|
| Demodulator |
| QPSK |
|
| Symbole Rate |
2 - 45 Mbauds |
Outer Decoder Reed Solomon (204, 188)
Deinterleaver Convolutional (Depth 12)
Including Spectral Inversion Ambiguity Resolution
Forward Error Correction (Automatic Detection)
Viterbi Code Rate 1/2, 2/3, 3/4, 5/6, 7/8
Nyquist Baseband Filters
Automatic Frame Synchronization
DVB-S Descrambler |
|
| Frame Relay |
FR IETF Encapsulation
Up to 4 DLCIs Hardware Filtering
FR FCS Hardware Processing
IP over FR Unicast Routing
Up to 72 Mbit/s Sustained |
|
| Physical Interfaces |
LCD Front Panel (20 characters x 2) Display and Keypad
LED Indicators (Unlock, Status, LAN, Power)
Signal RS-232, Max 115.2 Kbit/s (Serial 9-Pin D-Sub (Male))
Console Port
Ethernet 10BaseT & Fast Ethernet 100BaseT (Network RJ45) |
|
| General / Environment |
| Safety |
CE, FCC, CSA |
| Operating Temperature |
+5°C to +40°C |
| Power Supply Voltage |
85 to 264 VAC 47 to 63 Hz |
| Power Consumption |
Max. 60W (Avg. 35W) |
| Weight |
12.5 lbs 5,7 kg |
| Dimension |
432 x 45 x 300 mm
19" 1U Rack Unit |
| Management Interfaces |
| Multiple Remote Control and Management Interfaces : |
|
| SNMP, LCD Display & Key Pad,
Web Interface, Telnet SSH |
|
| Routing |
| Unicast, Multicast, Broadcast Routing
(Static, IGMP, DVMRP, NAT Dynamic*) |
|
| IP Protocols |
Fully IPv4 Compliant (RFC 791, 792, 919, 922, 950, 1112)
Fully UDP Compliant (RFC 768) Fully PPP Compliant (RFC 1661, 1662)
Fully TCP Compliant (RFC 793) Fully PPTP Compliant (RFC 2637) |
|
| Tuner Settings |
Frequency / Polarization / Baud Rate / FEC (Manual or Auto)
LNB Type / Voltage / Power - Tuning & Scanning Frequency |
|
Monitoring:
VBER / CBER *
Digital Level / Eb/No
Symbol (Baud) Rate
IP (Data) Rate
Total IP Packets & Bytes
Lock & Status
Temperature |
|
| Settings & Controls |
Profile Management (Save / Restore / Delete)
Up to 32 Profiles on FlashCard
Firmware Management (Load / Backup / View Contents & Versions)
HTTP & TFTP Load and Backup of Firmware & Profiles
Read & Write Passwords for all Interfaces
IP Address & Mask / ICMP Redirect / Date & Time / System Reset / ... |
|
| Monitoring Tools |
Spectrum Analyzer
Ping
Traceroute
Syslog
IP Dump
Netstat
FR Stat |
|
| Optional Software PACKS |
Pack IP Advanced:
DHCP Server
NAT
TCP Acceleration Proxy
Firewall |
|
Pack Security:
(requires the pack IP Advanced)
IP Sec (requires an export customs authorization)
IP Crypt
SSH |
|
Optional Software Addons :
File Transfer
News Transfer
Redundancy |
|
MAP PRICES There are places on our web site and in our print ads, where the spaces for prices are intentionally left blank. In other instances, the advertised; price is higher than the price you actually pay when you order that item. The reason for this is MAP, or Minimum Advertised Price. MAP is a voluntarily agreement a retailer enters into with a supplier. According to the agreement, which varies in details from vendor to vendor, the retailer can sell an item for any price they wish, but may not advertise the item for an amount less than the Minimum Advertised Price. These agreements help level the playing field for both the small retailer and the giant retail chain. Retailers agree to MAP contracts because the vendor makes it worthwhile for them to do so. A retailer who abides by the agreement can count on getting first news and early shipments of new products, and generally enjoys a "favored" status. At Satcom Resources, while we abide by our MAP agreements, we want to make it as easy as possible for you, our customer. Where there is a lower selling price and we can, we will volunteer it -- no need for a nod-and-a-wink or a secret password. At Satcom Resources, our lowest selling price is always what you pay. Some Online Retailers make it difficult to tell you about lower-than-MAP prices. At Satcom Resources, we've set up workarounds. Either we ask you to call, or we will e-mail the price.If you still have any questions about MAP policies, feel free to contact us via e-mail at info@satcomresources.com. |
|
 |
|
|
|
|
|
|
|
|